Installing wire harness for dashboard
NOTE:
Incorrect handling of wire harness
- Risk of damage to lines
→ The wire harness contains all airbag lines, antenna lines and optical waveguides.
→ The wire harness must not be separated and is always replaced as a complete wire harness when carrying out extensive repairs.
→ If individual lines are damaged, shut off these lines and install new lines. Route the new lines along the wire harness and secure them to the wire harness.
NOTE:
Incorrect handling of optical waveguides
- Risk of damage to optical waveguide
→ Observe the requirements for working with and installing optical waveguides.
- Installation is performed in reverse order to removal.