Removing wiper linkage

→ Switch off electric power to drive motor.

→ Make sure it does not switch on again.

→ Check that there is no electric charge.

1. Switch off ignition and pull remote control out of ignition lock.
2. Release electric plug connection -1-  and pull it off the wiper motor -2-  .
3. Unscrew fastening screws -3-  .
4. Unclip the holder -4-  for the electric line at the holder -5-  .
5. Remove wiper motor with wiper linkage.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

6. Raise wiper linkage -1-  off the lever -2-  for the wiper motor.
7. Unscrew fastening screws -3-  and remove holder -4-  .
8. Remove wiper linkage -1-  from the wiper motor -5-  .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.