LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Macan S >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Window Motors & Regulators >> 64 - Glazing, Window Control >> WM 644819 Removing and installing front window channel seal >> Installing front window channel seal

Installing front window channel seal

Installation is performed in reverse order. Pay particular attention to the following: 

  1. The window channel seal is fixed to the molding and must always be replaced.
  2. Coat window channel seal with rubber lubricant before fitting.
  3. The new window channel seal comes with a protective film applied to the molding. The protective film must only be removed after fitting the window channel seal.
scientia non olet · About LEMON Manuals