Tools and materials
The following tools and materials are required for removing and installing the rear window with 2-component adhesive:
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
| A |
- Double cartridge gun VAS 5237; see Workshop Equipment Manual, Chapter 3.5 |
| B |
- Suction cups VAG 1344; see Workshop Equipment Manual, Chapter 3.5 |
| C |
- Special electric cutter (fine) VAG 1561 A; see Workshop Equipment Manual, Chapter 3.5 |
| D |
- Flashing knife, U-type 639.031.130.22; see Parts Catalogue, Main Group 8 |
| H |
- 2-component window adhesive 000.043.300.94, contains set components H1-H8; see Parts Catalogue, Main Group 8 |
| H1 |
- Cleaning solution |
| H2 |
- Primer |
| H3 |
- Activator |
| H4 |
- Swab |
| H5 |
- Cartridge, component A |
| H6 |
- Cartridge, component B |
| H7 |
- Mixing nozzle |
| H8 |
- Processing nozzle |
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
| A |
- Removal kit for flush bonded windows VAG 1474 B, contains set components A1-A9; see Workshop Equipment Manual, Chapter 3.5 |
| B |
- Cutting thread, see Parts Catalogue, Main Group 8 |
| A1 |
- Guide rail |
| A2 |
- Cutting tool (wire holder) |
| A3 |
- Spooling device |
| A4 |
- Awl |
| A5 |
- Guide rail |
| A6 |
- Spatula |
| A7 |
- Steering roller with arm bracket |
| A8 |
- Handle |
| A9 |
- Square cutting wire |