Installing padding for rear backrest

Information 

Detach padding from the cover and secure it, see → 745255 REPLACING PADDING FOR REAR BACKREST 

1. Secure cover piping -1-  . To do this, start from the top and moving to the underside of the backrest (-A, B, C, D-  ), press the cover piping -1-  into the retaining strips -2-  .
2. Fit cover on locking mechanism for backrest -1-  from above and clip it in .
3. Fit cover on lock for backrest -1-  at the sides and press it on securely.
4. Only for left rear backrest:  Remove cover for belt.
   1. 4.1. Carefully pull cover for belt -1-  apart at the connection point - A-  and guide in the belt.
   2. 4.2. Fit cover for belt -1-  at the front fixing clip - B-  and press it on securely at the rear - C-  .