Installing cover for front backrest

Information 

Detach padding from the cover and secure it, see → 741955 REPLACING COVER FOR FRONT BACKREST 

1. Pull padding with cover over the backrest frame from above.
2. Align padding with cover on the backrest frame - A-  .
3. Pull the cover and padding back between the seat surface and backrest - B-  .
4. Plug in electric plug connection for seat heating -1-  (-A-  ) until the connector engages securely.
5. Tighten fastening screws -3-  for ISOFIX clips -4-  (Tightening torque 7.5 Nm (5.5 ft lb.) +/-0.5 Nm (+/-0.5 ft lb.)  ).
6. Clip in seat cover at the rear -2-  in an upward direction.
7. Engage restraining strap -1-  at the left and right.
8. Fit fixing clips -1-  .
9. Engage the cover in the cut-out for the backrest cover all the way around.