LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Macan S >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seats >> 72 - Seat Frames >> WM 723419 Removing and installing lumbar support >> Removing lumbar support

Removing lumbar support

  1. Release and disconnect electric plug connection for lumbar support adjustment motor -1-  and lumbar curvature motor -2- (-a-)  .
    G12890533
  2. Drill out blind rivets -3-  using a suitable drill bit.
    G12890534
  3. Fold the lumbar support up - A-  and press the retaining bars -4-  at the left and right together.

    Disengage retaining bars -4-  from the backrest frame - B-  .

    G12890535
  4. Remove the complete lumbar support from the backrest frame.
scientia non olet · About LEMON Manuals