Installing trim panel for seat: Notes

Information 

Fixing clips on the seat frame will be damaged irreparably during removal. Replace expansion rivets and fixing clips during installation and do not re-use them.

1. Connect electric plug connection for seat adjustment - A  and lock it - a-  .

   Information 

   Check that the wiring harness for the seat adjustment is correctly routed:

   Route the wiring harness -1-  in the front area under the bracket -2-  and in the side area along the bracket -2-  .

   In the side area, position the wiring harnesses above the sealing surface -3-  .

   Once correctly routed, secure the wiring harness in the clips or with tie-wraps.

2. Fit trim panel for seat -2-  at the front - C-  and guide it in at the rear from above - B-  into the seat - A-  .
3. Secure trim panel for seat -2-  with the expansion rivets -1-  .