Removing A-pillar trim panel

Information 

• The number of fastening screws, fixing clips, plug connections, holders and trim panels can vary depending on equipment.
• The illustrations for removing and installing the drive mechanism are shown only on one equipment variant and may differ from the actual equipment variant.
• Some steps must be carried out automatically.
• Some of the repair illustrations show only one side of the vehicle.

1. Unclip cover -1-  .
2. Unscrew fastening screw -2-  .
3. Unclip A-pillar trim panel -3-  . Make sure that the fixing clips -4-  are loosened completely from the A-pillar.
4. Guide trim panel -3-  out of the dashboard mounting -5-  in direction of arrow.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.