Removing carpet

Information 

• The number of fastening screws, fixing clips, plug connections, holders and trim panels can vary depending on equipment.
• The illustrations for removing and installing the drive mechanism are shown only on one equipment variant and may differ from the actual equipment variant.
• Some steps must be carried out automatically.
• Some of the repair illustrations show only one side of the vehicle.

1. Carefully lift up rear scuff plate -1 -  in the front area and remove carpet -2-  .
2. Lift carpet -2-  in the rear area - A-  .
3. Guide all electric lines out of the carpet -2-  .
4. Disengage the carpet -2-  at the sides from the retaining pivot -3-  .
5. Pull carpet -2-  back slightly.
6. Press carpet -2-  together slightly in the footwells, guide it out at the trim panels -4-  and remove it by pulling it to the rear.
7. Remove carpet -2-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.