Removing outside temperature sensor
- Switch off ignition and pull remote control out of ignition lock.
Turbo vehicles only
- Swivel right flap -1-
of the air guide forward.
All vehicles
- Pull outside temperature sensor -2- out of the right flap.
- Release and disconnect electric plug connection -3-
.
Information
Checking branch of wire harness for outside temperature sensor
- Visual inspection: check that the electric line is routed with the tie-wrap holder .
- No, then continue with Step 5 .
- Yes, no further action required .
- Rework branch of wire harness for outside temperature sensor:
- 5.1. Secure tie-wrap holder -1- , Part No. 3D0.971.838.L , to the right flap of the air guide as shown.
- 5.2. Secure electric line -2- for the outside temperature sensor with a tie-wrap -3- .