LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Macan S >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Gauges & Instrument Panels >> 90 - Instruments >> WM 906419 Removing and installing control unit for auxiliary alarm system PCC/VTS >> Preliminary work

Preliminary work

Information 

Before removing the PCC Vehicle Tracking System control unit, the system must be set to Vehicle Servicing mode  .

Vehicle Servicing mode can only be set by the customer  using Car Connect.

  1. Set PCC/VTS control unit to Vehicle Servicing mode.

Remove rear seat. → 724819 REMOVING AND INSTALLING REAR SEAT - "REMOVING "

scientia non olet · About LEMON Manuals