Installing loudspeaker booster
NOTE:
Incorrect handling of optical waveguides
- Risk of damage to optical waveguide
→ Observe the requirements for working with and installing optical waveguides.
Information
Always comply with the regulations for handling ESD-sensitive components!
- Always wear approved work clothes and shoes when carrying out assembly work .
- Do not remove new parts from ESD (electrostatic discharge) protective packaging until shortly before installation .
- Do not touch electric pins and plug contacts .
- Installation is performed in reverse order to removal.
- Tighten fastening screws securing loudspeaker booster to holder. Tightening torque 6 Nm (4.5 ft lb.)