Replacing rear door

Information 

• The scope of work to be carried out can vary depending on equipment variant  .
• Some steps must be carried out automatically  .
• Missing or damaged components and fastening parts must be replaced with new ones  .

1. Remove window channel seal.
2. Remove window guide. → 644619 REMOVING AND INSTALLING REAR WINDOW GUIDE
3. Remove cover for door. → 664219 REMOVING AND INSTALLING COVER FOR REAR DOOR
4. Remove door handle. → 581119 REMOVING AND INSTALLING REAR DOOR HANDLE 
5. Remove door lock. → 581719 REMOVING AND INSTALLING REAR DOOR LOCK 
6. Remove inner door release. → 583719 REMOVING AND INSTALLING INNER DOOR RELEASE 
7. Remove door arrester. → 585919 REMOVING AND INSTALLING REAR DOOR ARRESTER 
8. Remove door control unit. → 587319 REMOVING AND INSTALLING REAR DOOR CONTROL UNIT 
9. Remove rubber seal for rear door. → 586319 REMOVING AND INSTALLING RUBBER SEAL FOR REAR DOOR 
10. Remove power window regulator. → 647119 REMOVING AND INSTALLING REAR POWER WINDOW REGULATOR
11. Remove wire harness for door. → 973219 REMOVING AND INSTALLING WIRE HARNESS FOR DOOR
12. Remove door. → 585119 REMOVING AND INSTALLING REAR DOOR 
13. Install new door. → 585119 REMOVING AND INSTALLING REAR DOOR 

Assembly is carried out in reverse order  .