LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 99 (9X - Electrical System - General) >> WM 9X00IN Measurement Of Closed-Circuit Current (All Models) >> Connecting The Measuring Device

Connecting The Measuring Device

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Use alligator clips to connect the measuring device to the battery ground and body ground.
  2. Remove ground strap from the body and secure against contact with the body. The entire vehicle current now flows through the ammeter.
scientia non olet · About LEMON Manuals