Installing Armrest With Cover (Rear)

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Armrest Cover (Rear)

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Install armrest with cover (rear): Insert armrest with cover -1- with the pin -9- in the guide -10- -Arrow A- .

Fig 2: Installing Armrest With Cover
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Position armrest with cover -1- with the pin -7- on the guide -8- and insert -Arrow B- .

Fig 3: Positioning Armrest With Cover
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Push retaining clip -6- over the pin -7- until it engages fully -Arrow C- .

Fig 4: Pushing Retaining Clip - 6 Over Pin - 7
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Engage restraining strap of cover -5- -Arrow D- .

Fig 5: Engaging Restraining Strap Of Cover
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Install armrest cover: Insert armrest cover -2- from below -Arrow E- and clip onto the backrest frame using the locking tabs -3- -Arrow F- .

Fig 6: Installing Armrest Cover Clip On Backrest Frame
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Fig 7: Installing Armrest Cover Using Tool
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Swivel the armrest cover -2- in over the backrest frame -Arrow G- .

Fig 8: Rotating Armrest Cover - 2 Over Backrest Frame
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Close arm rest with cover -1- -Arrow H- .

Fig 9: Closing Arm Rest With Cover
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Install backrest. → Installing rear backrest