Installing Regulator For Rear Seat Heating

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Insert regulator from the inside -Arrow A- until locking tabs are felt to engage -Arrow B- .

Fig 1: Inserting Regulator
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Push in the lock -Arrow A- , then insert the connector -Arrow B- until the locking tab -a- is felt to engage in the opening -b- .

Fig 2: Inserting Rear Seat Heating Connector
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Fit tray into the console -arrow- and secure tray and retaining bracket -C- with fastening screws -Arrows 1- .

Fig 3: Securing Tray And Retaining Bracket
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Clip in the cover -arrows- until the locking tabs are felt to engage.

Fig 4: Clipping Cover
Courtesy of PORSCHE CARS NORTH AMERICA, INC.