LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 95 (91 - Radio, Stereo, Telephone, On-Board Computer) >> WM 918419 Removing And Installing Antenna Amplifier >> Installing Antenna Amplifier

Installing Antenna Amplifier

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position antenna amplifier in installation position -Arrow A-  and secure with the fastening screw -Arrow 3-  .
    Fig 1: Securing Antenna Amplifier
    G09415138Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Position ground strap in installation position -Arrow B-  and screw on the fastening nut -Arrow 2-  , but do not tighten.
  3. Secure ground lead and ground strap with fastening screw -Arrow 1-  , then tighten fastening nut -Arrow 2-  .
  4. Push antenna leads onto the antenna amplifier -Arrow A-  until the locking tabs -Arrows B-  are felt to engage.
  5. Push on the plugs for the antenna leads -a-  and the power supply -b- -Arrows C-  .
  6. Secure leads with adhesive tape -Arrow D-  .
    7. Fig 2: Connecting Antenna Plugs
    G09415139Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals