Installing Sensor For ParkAssist

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Information

If one or more sensors must be replaced or repainted:

Information

If one or more sensors must be replaced or repainted:

Push the connector -2- onto the sensor -1- until it engages securely.

Fig 1: Installing Sensor
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Insert sensor into the mounting point of the bumper until the retaining tabs on the sensor engage.