Technical Values
WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Reversing camera trim to housing | Tightening torque | 0.5 Nm (0.5 ftlb.) | |||
| Reversing camera trim to housing | Tightening torque | 0.5 Nm (0.5 ftlb.) | |||
| Seam joining line for reversing camera trim to rear lid trim | Fitted evenly at sides | Gap dimension | 3 mm | ||
| Seam joining line for reversing camera trim to moulding | Gap dimension | 2 mm | +/-0.8 mm | ||
| Fastening screws securing reversing camera to lid trim panel | Tightening torque | 1.2 Nm (1.0 ftlb.) |