Removing Rear Bass Speaker (Harman)

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Summary For Removing Rear Loudspeaker (Harman)

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

NOTE: Voltage peaks

Risk of damage to load or to the control unit

→ Remove the ignition key and switch off load before disconnecting or removing load.

Release connector -arrows a- and pull it off.

Fig 2: Removing Rear Bass Speaker (Harman)
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Carefully drill out the six pop rivets -1- . Make sure that the sealing surface of the door sub-frame is not deformed when drilling out the pop rivets.
Remove the bass speaker.
Remove any remaining seals between the bass speaker and the door unit.