Removing And Installing Front Loudspeakers (Harman)

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Diagram Of Front Speakers (Harman)

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

NOTE: Voltage peaks

Risk of damage to load or to the control unit

→ Remove the ignition key and switch off load before disconnecting or removing load.

NOTE: Voltage peaks

Risk of damage to load or to the control unit

→ Remove the ignition key and switch off load before disconnecting or removing load.

Release and pull off connectors.

Fig 2: Unscrewing Fastening Screws For Speaker Cover
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Unscrew the three fastening screws -2- from the speaker cover in the door panel.
Unscrew the two fastening screws -2- for the mid-tone speaker from the speaker cover and remove the mid-tone speaker.

Fig 3: Unscrewing Fastening Screws For Mid-Tone Speaker
Courtesy of PORSCHE CARS NORTH AMERICA, INC.