LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 95 (91 - Radio, Stereo, Telephone, On-Board Computer) >> WM 914119 REMOVING AND INSTALLING FRONT LOUDSPEAKERS (Harman) >> Installing Front Loudspeakers (Harman) >> Installing Front Bass Speaker (Harman)

Installing Front Bass Speaker (Harman)

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Diagram Of Front Speakers (Harman)
G09415013Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Check the mounting points and seal of the new bass speaker for damage or deformation. If there is damage or deformation, the bass speaker may not be installed, since it cannot be guaranteed that the seal will be airtight. Any pieces of the pop rivets that have fallen into the door unit carrier must be removed before the bass speaker is installed.
  2. Position the bass speaker.
    Fig 2: Installing Front Bass Speaker (Harman)
    G09415014Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Insert the six pop rivets -1-  and use the hand riveting tool for pop rivets Nr.124-1  and the nozzle tips for hand rivet extractors Nr.124-2  to rivet the woofer to the door sub-frame.
  4. Press in the connector until it is felt to engage.
scientia non olet · About LEMON Manuals