LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 94 (60 - Sliding Roof, Tilting Roof) >> WM 606519 Removing And Installing Control Unit For Roof Assembly (Panoramic Roof) (All Models) >> Removing Control Unit For Roof Assembly (Panoramic Roof)

Removing Control Unit For Roof Assembly (Panoramic Roof)

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Overview Of Control Unit For Roof Assembly (Panoramic Roof)
G09411595Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Release the connectors -Arrows A-  and pull them off -Arrows B-  .
    Fig 2: Pulling Off Connectors And Removing Control Unit
    G09411596Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Unscrew fastening screws -1-  and remove control unit.
    Fig 3: Pulling Off Connectors And Removing Control Unit
    G09411597Courtesy of PORSCHE CARS NORTH AMERICA, INC.