Installing Sunroof Panel

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Sunroof Panel

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Move sunroof mechanism to the "roof closed" position.
Insert sunroof panel.

Fig 2: Inserting Sunroof Panel
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Screw in fastening screws.
1. 3.1. Screw in fastening screws -3- and tighten so that the cover for the sliding roof can still be moved easily.
  
  Fig 3: Sliding Roof
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
→ Installing panel of panorama roof
Lift sunroof panel.
1. 5.1. Move sunroof panel -1- to the final raised position.
  
  Fig 4: Moving Sunroof Panel 1 To Final Raised Position
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Hook in bellows.
1. 6.1. Hook bellows -2- at the top in the rear area forwards into the retaining pivot -4- .
  
  Fig 5: Locating Retaining Pivot And Hook Bellows
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. 6.2. Push bellows -2- at the bottom in the rear area backwards into the guide.
  
  Fig 6: Pushing Bellows
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  
  Fig 7: Locating Bellows
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Clip in bellows.
1. 7.1. Clip in bellows -2- at the top and bottom in the front area.
  
  Fig 8: Cliping In Bellows 2 At Top And Bottom In Front Area
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Perform function test.
1. 8.1. Check sunroof functions by fully opening and closing or raising.