LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 94 (60 - Sliding Roof, Tilting Roof) >> WM 600619 Removing And Installing Roof Assembly (Panorama Roof) (All Models) >> Subsequent Work

Subsequent Work

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install roof joint cover strip. → Installing roof joint cover strip
  2. Connect the battery. → WM 9X00IN WORK INSTRUCTIONS AFTER DISCONNECTING THE BATTERY (ALL MODELS)
  3. Close the roof assembly with the emergency operation mechanism and initialise final deactivation.
  4. Read out and erase the fault memories for all systems.
  5. Check roof assembly functions by completely opening and closing or raising it.
  6. Read out the fault memory for the roof assembly and if a fault was entered in the fault memory, carry out a diagnosis using the PIWIS Tester 9718. 
  7. Install headliner. → Installing roof lining
scientia non olet · About LEMON Manuals