Technical Values: Overview
WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Front door trim strip to rear door trim strip (P) | Rear door only lowered | Gap dimension | 0 mm | -1 mm | |
| Gap dimension from rear door frame to B-pillar trim panel (Q) | Gap dimension | 0.8 mm | +/-0.5 mm | ||
| Door window to trim strip and outer side section (F) | Gap dimension | 5 mm | |||
| Door to outer side section (G) | Door only raised (max. 1 mm) | Gap dimension | 4 mm | +/-0.5 mm | |
| Door cover to top of outer door panel (H) | Gap dimension | 1 mm | |||
| Door cover to bottom of outer door panel (J) | Gap dimension | 5 mm | |||
| Front door to rear door (K) | Rear door only lowered (max. 1 mm) | Gap dimension | 4.5 mm | +/-0.5 mm | |
| Fastening screws securing upper and lower door hinge to door | Items -1, 2, 3- (M8 thread) | Initial tightening | 20 Nm (15 ftlb.) | +/-3 Nm (+/- 2 ftlb.) | |
| Fastening screws securing upper and lower door hinge to door | Items -1, 2, 3- (M8 thread) | Final tightening | 90° | ||
| Fastening screws securing door lock striker to C-pillar | Item -6- (M8 thread) | Tightening torque | 20 Nm (15 ftlb.) | +/-2 Nm (+/- 1.5 ftlb.) | |
| Rear door to rear side section | Installation dimension with pre-tension | Test and adjustment value | 2 mm |