Removing Rear Window Channel Seal

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Rear Window Channel Seal

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Opening the rear door window
1. 1.1. Open rear door window -1- as far as possible (-Arrow A- ).
  
  Fig 2: Removing Rear Door Window
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Removing the rear window shaft seal
1. 2.1. Release rear window shaft seal -2- beginning at the rear end (-Arrow B- ) with a plastic wedge and pull it off from the sheetmetal flange -3- in an upward direction (-Arrow C- ).
  
  Fig 3: Removing Rear Window Shaft Seal
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Removing the rear window shaft seal
1. 3.1. Remove the rear window shaft seal -2- (-Arrows D- ).
  
  Fig 4: Removing Rear Window Shaft Seal
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.