Installing Rear Window Channel Seal

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Rear Window Channel Seal

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Information

Make sure here that horizontal alignment is correct! -Arrow C- and -Arrow D-

Fig 2: Locating Front Window Channel Seal
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Fig 3: Locating Front Window Channel Seal

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Install the rear window shaft seal
1. 1.1. Push rear window channel seal -2- , beginning at front end (-Arrow A- ), onto the sheetmetal flange -3- from above (-Arrow B- ).
  
  Fig 4: Installing Rear Window Shaft Seal
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Closing rear door window
1. 2.1. Close rear door window -1- completely (-Arrow E- ).
  
  Fig 5: Closing Rear Door Window
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.