Installing Front Power Window Motor
WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
- Position window regulator motor and push into the teeth.
- Insert plugs -Arrows 2, 3 and 4- on control unit for window regulator motor, until plugs perceptibly engage.
- Insert the three fastening screws -1- and tighten them. → Tightening torque: 2.0 ftlb.