LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 91 (64 - Glazing, Window Control) >> WM 644019 Removing And Installing Front Door Window (All Models) >> Removing Front Door Window

Removing Front Door Window

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Front Door Window
G09411803Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Remove power window motor: 

Fig 2: Identifying Power Window Motor
G09411804Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Release electric connector -3-  and pull it off (-arrow A-  ).
    Fig 3: Pulling Electric Connector
    G09411805Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Unscrew fastening screws -2-  and remove power window motor.
    Fig 4: Removing Power Window Motor
    G09411806Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Remove side window: 

  3. Unscrew fastening screws -5-  of the fastening parts -4-  .
    Fig 5: Identifying Fastening Parts And Screws
    G09411807Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  4. Open fastening parts (-arrows B-  ) and remove side window -6-  in a downward direction (-arrows C-  ).
    Fig 6: Removing Side Window
    G09411808Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  5. Remove fastening parts -4-  from sliding pads -7-  .
    Fig 7: Identifying Fastening Parts And Sliding Pads
    G09411809Courtesy of PORSCHE CARS NORTH AMERICA, INC.