LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 87 (90 - Instruments) >> WM 900319 Removing And Installing Dashboard Insert (All Models) >> Removing Dashboard Insert

Removing Dashboard Insert

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Use a plastic spatula to unclip the trim panel -a-  from the upper cover at the left and right.
    Fig 1: Unclipping Trim Panel From Upper Cover On Left And Right
    G09414849Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Unscrew the two fastening screws -1-  for instrument panel insert (cover for instrument cluster).
    Fig 2: Unscrewing Dashboard Inset Fastening Screws
    G09414850Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Unscrew the fastening screws for the instrument cluster -2-  .
  4. Press in the dashboard inset (cover for instrument cluster) at the side to unclip -arrows A-  , lift the front slightly -arrow B-  , and unscrew the fastening screw -3-  .
  5. First pull the dashboard inset (cover for instrument cluster) -b-  to the rear -arrow A-  , then take out in an upward direction -arrow B-  .
    Fig 3: Removing Dashboard Insert
    G09414851Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals