LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 87 (90 - Instruments) >> WM 900319 Removing And Installing Dashboard Insert (All Models) >> Installing Dashboard Insert

Installing Dashboard Insert

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position dashboard inset (cover for instrument cluster) -b-  into the installation position.
    Fig 1: Installing Dashboard Insert
    G09414852Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Lift dashboard inset (cover for instrument cluster) slightly at the front and -arrow A-  position the fastening screw -3-  , but do not screw down.
    Fig 2: Screwing Down Dashboard Insert
    G09414853Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Push the dashboard inset (cover for instrument cluster) completely to the front -arrows B-  and tighten the fastening screw -3-  .
  4. Press the dashboard inset (cover for instrument cluster) downward and screw down the fastening screws -1 and 2-  . → Tightening torque: 1 ftlb.  → Tightening torque: 1 ftlb. 
  5. Insert trim -a-  and press against top of instrument panel insert (cover for instrument cluster) until the clips can be felt to engage.
    Fig 3: Installing Lining
    G09414854Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals