WM 421755 Replacing Bearing For Trailing Arm (All Models): Information: Tools
WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
| Item | Designation | Explanation |
|---|---|---|
| -A- | Tubular piston cylinder VAS 6178 | The tubular piston cylinder is used together with the pneumatic hydraulic pump VAS 6179. |
| → see Figure Tool set T10230 | Assembly fixture T10230 | Tool set for pressing hydraulic mount/rubber-metal mount in and out, consisting of No. 1-15. |
| -1- | Threaded rod - assembly fixture T10230 | Used in the tubular piston cylinder VAS 6178 -A- . |
| -2- | Nut with collar - assembly fixture T10230 | Screwed onto the threaded rod -1- . |
| -3- | Spacer sleeve 180 - assembly fixture T10230 | For pressing the bearing out and in. |
| -4- | Pressure piece 40 - assembly fixture T10230 | For pressing out the bearing. |
| -5- | Pipe 56 - assembly fixture T10230 | For pressing out the bearing. |
| -6- | Pressure disc - assembly fixture T10230 | For pressing the bearing out and in. |
| -7- | Adjusting washer - assembly fixture T10230 | Screwed into the tubular piston cylinder VAS 6178 -A- with two countersunk screws. |
| -8- | Support 55 - assembly fixture T10230 | For pressing in the bearing. |
| -13- | Pressure head - assembly fixture T10230 | Pressure head from assembly fixture T10205 (!); screwed into the tubular piston cylinder VAS 6178 -A- . |
| -14- | Washer | Placed on the threaded rod -1- . |
| -15- | Nut | Commercially available M14 nut. Screwed onto the threaded rod -1- . |