LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 86 (42 - Rear Wheel Suspension, Drive Shafts) >> WM 420519 Removing And Installing Rear Axle Housing (All Models) >> Preliminary Work

Preliminary Work

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. For vehicles with level adjustment: Switch off level adjustment. → WM 4000V0 Lifting the vehicle .
  2. To bleed the level adjustment system (compressed air must be released from the system), use the Porsche System Tester. To do this, select the Bleed level adjustment menu item in the Level adjustment system.
    Fig 1: Identifying Porsche System Tester
    G09419019Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Raise the vehicle at the jacking points provided → WM 4000V0 Lifting the vehicle .
  4. Remove the rear wheels → Removing and installing wheel .
  5. Remove the tailpipe → Removing Exhaust System .
scientia non olet · About LEMON Manuals