Technical Values
WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Fastening screw securing rail to side panel | Tightening torque | 1.5 Nm (1.0 ftlb.) | +/-0.5 Nm (+/-0.5 ftlb.) | ||
| Fastening screw securing rear apron to rail | Tightening torque | 1.5 Nm (1.0 ftlb.) | +/-0.5 Nm (+/-0.5 ftlb.) | ||
| Fastening screw securing rear apron to closing panel support | Tightening torque | 4.5 Nm (3.5 ftlb.) | +/-0.5 Nm (+/-0.5 ftlb.) | ||
| Fastening screw securing cover to rear apron | Tightening torque | 4.5 Nm (3.5 ftlb.) | +/-0.5 Nm (+/-0.5 ftlb.) | ||
| Fastening screw securing rear apron to side panel | Tightening torque | 1.5 Nm (1.0 ftlb.) | +/-0.5 Nm (+/-0.5 ftlb.) | ||
| Fastening screw securing wheel housing liner to rear apron | Tightening torque | 2.5 Nm (2.0 ftlb.) | +/-0.5 Nm (+/-0.5 ftlb.) | ||
| X = distance from upper part of rear apron | Gap dimension X | 18 mm | |||
| Y = work out distance at sides to the left and right uniformly | Gap dimension Y | 20 mm | |||
| X = distance from upper part of rear apron | Gap dimension X | 18 mm | |||
| Y = work out distance at sides to the left and right uniformly | Gap dimension Y | 20 mm | |||
| X = distance from upper part of rear apron | Gap dimension X | 7 mm | |||
| Y = work out distance at sides to the left and right uniformly | Gap dimension Y | 7 mm | |||
| Fastening screw nut securing centre retaining strip to end plate | Tightening torque | 8 Nm (6 ftlb.) | +/-1 Nm (+/-0.5 ftlb.) |