Installing Side Guide Rail

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Installation Position Of Guide Rail

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Install side guide rails.

Fig 2: Installing Side Guide Rail
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
1. 1.1. Clip in expander nuts -3- .
2. 1.2. Position side guide rails -2- and attach with the top side flush with the side panel contour.
3. 1.3. Screw in fastening screws -1- .
  → Tightening torque: 1.5 Nm (1.0 ftlb.)+/-0.5 Nm (+/-0.5 ftlb.)