Technical Values
WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Fastening screw securing front guide rail to lock carrier | Tightening torque | 1.5 Nm (1.0 ftlb.) | +/-0.5 Nm (+/-0.5 ftlb.) | ||
| Gap dimension from inner guide rail to main headlight | Gap dimension X | 23.0 mm | |||
| Gap dimension from outer guide rail to main headlight | Gap dimension Y | 24.5 mm | |||
| Fastening screw securing side guide rail to wing | Tightening torque | 2.5 Nm (2.0 ftlb.) | +/-0.5 Nm (+/-0.5 ftlb.) | ||
| Fastening screw securing side guide rail to lock carrier | Tightening torque | 1.5 Nm (1.0 ftlb.) | +/-0.5 Nm (+/-0.5 ftlb.) | ||
| Fastening screw securing front apron to lock carrier | Tightening torque | 3.5 Nm (2.5 ftlb.) | +/-0.5 Nm (+/-0.5 ftlb.) | ||
| Fastening screw securing front apron to cross member | Tightening torque | 4.5 Nm (3.0 ftlb.) | +/-0.5 Nm (+/-0.5 ftlb.) | ||
| Fastening screw securing front apron to guide rail | Tightening torque | 2.5 Nm (2.0 ftlb.) | +/-0.5 Nm (+/-0.5 ftlb.) | ||
| Fastening screw securing front apron to wing | Tightening torque | 2.5 Nm (2.0 ftlb.) | +/-0.5 Nm (+/-0.5 ftlb.) | ||
| Fastening screw securing front apron to lock carrier | Tightening torque | 3.5 Nm (2.5 ftlb.) | +/-0.5 Nm (+/-0.5 ftlb.) |