Removing Side Guide Rail

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Installation Position Of Side Guide Rail

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Information

Only if subsequent repair work is carried out on the wing.

Remove side guide rail.
1. 1.1. Unscrew fastening screws -2 and 3- .
2. 1.2. Remove side guide rails -1- by pulling them forward -arrow A- .
3. 1.3. Check expander nuts -4- and unclip -arrow B- and replace them if necessary.
  
  Fig 2: Removing Side Guide Rail
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.