Installing Side Guide Rail

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Installation Position Of Side Guide Rail

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Install side guide rail.
1. 1.1. Engage expander nuts -4- (-arrow A- ).
2. 1.2. Position side guide rail -1- (-arrow B- ) and fit it with the top side flush with the contour of the wing.
3. 1.3. Screw in fastening screws -2 and 3- and tighten to the specified torque → Tightening torque: 2.5 Nm (2.0 ftlb.)+/-0.5 Nm (+/-0.5 ftlb.) → Tightening torque: 1.5 Nm (1.0 ftlb.)+/-0.5 Nm (+/-0.5 ftlb.).
  
  Fig 2: Installing Side Guide Rail
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.