LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 81 (53 - Body Rear - 92A Cayenne) >> WM 534855 Replacing Rear Side Member (Section) (All Models) >> Subsequent Work >> Subsequent Work For Body Repairs

Subsequent Work For Body Repairs

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove vehicle from the straightening bench.
  2. Clean welded joints and sheetmetal flanges with a wire brush.
  3. Prime flange areas with 2K primer.
  4. Restore standard seal with body sealant → WM 5000IN SEAM SEALS (ALL MODELS) .
  5. Restore standard undersealing with underbody sealant → WM 5000IN UNDERSEALING (ALL MODELS) .
  6. Paint repair area and adjacent surfaces, if necessary.
  7. Apply cavity preservation to the accessible areas of the repair. → WM 5000IN CAVITY PRESERVATION (ALL MODELS) .
  8. Install removed accessories in the repair area.
scientia non olet · About LEMON Manuals