Removing Centre Cover

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Centre Cover Component Location

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Unscrew fastening screw -1- and remove rear lifting platform holder -2- in a downward direction -arrow- .

Fig 2: Removing Rear Lifting Platform Holder
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Unclip cover -1- at the centre cover -2- in a downward direction -arrow A- and pull it out -arrow B- .

Fig 3: Removing Cover
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Unscrew fastening screws -1- and remove centre cover -2- in the rear area by pulling it down from the body -arrow A- .

Fig 4: Removing Centre Cover
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Pull out centre cover -2- in the front area under the wheel housing liner -3- (-arrow B- ).