Tools And Materials
WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
Information
- To mill the required shoulder, the tool with the designation Spot facer for Time-Sert thread repair set NR.122-2 must be used. The tool provided with the complete set supplied must not be used in this case!
| Item | Tool |
|---|---|
| -1- | Time-Sert thread repair set Nr.122-1 |
| -a- | Threaded bushing |
| -b- | Drill |
| -c- | Spot facer for Time-Sert thread repair set Nr.122-2 |
| -d- | Thread cutter |
| -e- | Screw-in tool |