Technical Values
WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
| Location |
Description |
Type |
Basic value |
Tolerance 1 |
Tolerance 2 |
| Milling depth for threaded bush |
Dimension X (measured from outer edge of sheet) |
Test and adjustment value |
10 mm |
|
|
| Thread depth |
Dimension Y (measured from outer edge of sheet) |
Test and adjustment value |
40 mm |
|
|