Technical Values: Overview
WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Lower side member to wheel arch | There must be an overlap with the new part when cutting. | Cut dimension, old part | 320 mm | ||
| Lower side member to A-pillar | There must be an overlap with the new part when cutting. | Cut dimension, old part | 90 mm | ||
| Lower side member to B-pillar | There must be an overlap with the new part when cutting. | Cut dimension, old part | 100 mm | ||
| Lower side member | Overlap | 50 mm | |||
| Lower side member | Overlap | 50 mm | |||
| Seals | Application depth | 10 mm | |||
| Seals | Application depth | 10 mm | |||
| Seals | Application depth | 10 mm | |||
| Body structure adhesion | Application depth | 6 mm | |||
| Wing fastening rail | Overlap | 50 mm |