Technical Values
WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Filler plate for upper carrier | Cut dimension, old part | 130 mm | |||
| Front side section | Cut dimension, old part | 170 mm | |||
| A-pillar | Cut dimension, new part | 200 mm | |||
| A-pillar | Overlap | 30 mm | |||
| B-pillar | Cut dimension, new part | 130 mm | |||
| B-pillar | Overlap | 50 mm | |||
| C-pillar | Overlap | 50 mm | |||
| Filler plate for upper carrier | Cut dimension, new part | 150 mm | |||
| Seals | Application depth | 10 mm | |||
| Seals | Application depth | 10 mm | |||
| Seals | Application depth | 10 mm | |||
| Seals | Application depth | 10 mm | |||
| Seals | Application depth | 10 mm | |||
| Seals | Application depth | 10 mm | |||
| Body structure adhesion | Application depth | 6 mm |