LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 80 (51 - Body Center, Roof, Frame - Cayenne) >> WM 511255 Replacing A-Pillar (All Models) >> Installing A-Pillar >> Installing Filler Plate For Upper Carrier

Installing Filler Plate For Upper Carrier

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Overview Of Side Member (Outside)
G09420619Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Install filler plate for upper carrier.
    1. 1.1. Position filler plate for upper carrier on the body and fix in place with tensioning clamps.
  2. Weld in filler plate for upper carrier.
    1. 2.1. Weld filler plate for upper carrier in area -A-  using inert gas.
      Fig 2: Identifying Welded Joints On Filler Plate For Upper Carrier
      G09420620Courtesy of PORSCHE CARS NORTH AMERICA, INC.
    2. 2.2. Weld filler plate for upper carrier in area -B-  using inert gas.
    3. 2.3. Resistance spot-weld filler plate for upper carrier in areas -C and D-  .
scientia non olet · About LEMON Manuals