Installing Front Seat Trim

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Engage inner side trim onto the seat frame from above -Arrow A- .

Fig 1: Engaging Inner Side Trim Onto Seat Frame
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Push lock inward -Arrow C- , then push in the trim at the bottom -Arrow B- .

Fig 2: Pushing Trim At Bottom
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Insert expanding clips -A- and push in the pins.

Fig 3: Inserting Expanding Clips
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Engage backrest cover on side trim -B- .

Fig 4: Engaging Backrest Cover On Side Trim
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Push outer side trim onto belt guide.

Fig 5: Pushing Outer Side Trim Onto Belt Guide
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Insert expanding clips -A- and push in the pins.

Fig 6: Inserting Expanding Clips
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Engage backrest cover on the outer side trim -B- .

Fig 7: Engaging Backrest Cover On Outer Side Trim
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Insert the two plugs into the seat adjuster switch -A- and swivel trim back to the installation position -B- .

Fig 8: Inserting Plugs Into Seat Adjuster Switch
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Information
- The number of plugs can vary, depending on the equipment.
Screw front trim into place -arrows- .

Fig 9: Identifying Front Trim Mounting Screw
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Insert seat belt cap on the front trim -Arrow A- and push in -Arrow B- until it can be felt to engage.

Fig 10: Inserting Seat Belt Cap On Front Trim
Courtesy of PORSCHE CARS NORTH AMERICA, INC.