LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 78 (20 - Fuel Supply, Control) >> WM 202519 Removing And Installing Carbon Canister On DFI Engines >> Installing Carbon Canister

Installing Carbon Canister

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Secure wiring harness at the back of the carbon canister.
  2. Fit all lines on the carbon canister at the plug connections.
  3. Secure carbon canister with M6 fastening screws and M6 nut. → Tightening torque: 9 Nm (6.5 ftlb.) 
scientia non olet · About LEMON Manuals