LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 74 (97 - Cables) >> WM 970919 Removing And Installing Main Wiring Harness - Floor Area And Left-Hand Side (All Models) >> Removing Main Wiring Harness - Floor Area And Left-Hand Side >> Overview

Removing Main Wiring Harness - Floor Area And Left-Hand Side: Overview

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Overview Of Main Wiring Harness - Floor Area And Left-Hand Side
G09415788Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Information 

NOTE: Incorrect handling of main wire harness
  • Risk of damage to lines

→ The main wire harness contains all airbag lines, antenna lines and optical waveguides.

→ The main wire harness must not be separated and is always replaced as a complete wire harness when carrying out extensive repairs.

→ If individual lines are damaged, shut off these lines and install new lines. Lay the new lines along the main wire harness and secure them to the main wire harness.